Post by mlof on Feb 27, 2014 4:11:31 GMT -5
No trades except the ones listed, please.
Prices are shipped CONUS.
Trades:
Good quality Woodland MARPAT combat shirt, small or extra small
Good quality multicam pants, small long
High speed gears
TM pattern Mk23 mags - this means Y&P and TM, Y&P preferred.
~10" AR freefloat RIS
Dboys SCAR H
DMR
VSR-10 clone
Full inventory HERE.
AUG CQB
I’ve got a CQB AUG project I’m looking to get rid of. It was originally a CA AUG (non-sportline). Externally, it has a CQB Barrel (don’t remember brand, maybe Dytac?), a TM A2 front receiver, and a stock that’s been wrapped in digital camo tape. The stock job is very nice, as you can see. It also has had a woodland camo pattern painted on the TM receiver. It will come with the OEM CA flash hider, which appears to be of high quality.
In that category of internal/external, it has been modified with a bolt through the receiver to ensure good compression instead of the buttplate. In high performance AUGs, this is virtually required; it not only frees up battery space, but also holds compression, as the OEM reinforcement is likely to bend or break. And trust me, this one needed it.
Here’s the internals list:
G&G piston head
G&G ported cylinder
SHS 15 metal tooth piston (rack glued in place, AoE adjusted)
70 duro sorbo pad on the cylinder head
SHS 13:1 gearset (earlier generation, won’t fail like the latest ones)
AMP high torque motor
JG mosfet
12 awg non-oxygen very high quality speaker wire
Unknown brass barrel
I think that’s about it. With an 11.1 lipo, it should be firing ~35rps @ around 350fps. This is absolutely ready for a 20-40c 11.1 lipo.
However, there's a compression issue somewhere. It's currently getting 70-170fps, and I cannot figure out why.
It's also missing the mock bolt assembly, and will come with one JG hicap.
$215 shipped.
M1014 Trishot
I also have a chopped 1014 trishot with three shells and a removable stock - I removed the stock, then sourced a bolt and plate to keep the grip on. It also had the inner barrels stabilized with an electrical tape barrel spacer, as they were previously flopping all over the place.
I also have a six shell holder that attaches to velcro. Probably condor or the like. It’s approximately an OD green.
$60 shipped for the gun w/ accessories.
$15 shipped for the shell holder
JG G36c
I have a nearly complete G36c. It’s missing the left side selector. It also has a broken internal selector. This means that (unless you open up the gun and change it) it’s stuck on either full or semi auto. Safe still works, but not fire selection. It fires very smoothly; I think the previous owner shimmed it (rather well). I also had to replace the handguard and magwell pins with jerry rigged versions, although both substitutes work very well. Finally, one of the rear sight apertures is cracked in half. This is intentional, as it provides a nice UMP style CQB sight, and you can still flip to the other one if you want the full ring.
$65 shipped.
DSG Kit
This DSG kit includes a RiotSC sector gear, a precut KA M4 tappet plate, and the RiotSC short spring/spacer combo. No issues with any of the pieces, and they’ve all only seen light wear.
$75 shipped.
TM Aimpoint
This TM Aimpoint is in excellent condition and fully functional. Includes brand new batteries and the mount seen here.
$55 shipped.
TM G17
I have a stock TM G17 here with no issues. It's been well used, and shows a bit of wear. It has TM three dot night sights installed and a JBU 6.01 tightbore that's slightly too long, but significantly increases the range and accuracy. It's easy to hit a torso at 150ft with this thing.
Includes the original TM mag, which has a fill valve o ring.
$150 shipped.
Blue Force Gear M4 Chest Rig
This is in multicam, and very lightly used with no problems. BFG is a high quality real steel gear company, and this is an excellent lightweight rig.
$65 shipped.
Condor Multicam Battle Belt
I have a condor battle belt with OD blackhawk riggers belt, both in medium. No issues, very light use.
40 shipped.
Madbull Noveske 12.5" Rail
This rail has seen a lot of use, and has a lot of surface wear. No problems, and it includes all mounting hardware.
$75 shipped.
King Arms Troy MRF-C Rail
This rail is well used, and has a large amount of wear. No problems, however. It includes all mounting hardware, and mounts to standard barrel nuts - a standard barrel nut can be included for $5 extra.
$60 shipped.
Redline Firebase Package
I have a very lightly used Redline Firebase and bendy hose for sale. No problems, and never had any. Includes one set of qd connectors.
$125 shipped.
G&P Troy MRF-C (7”)
I also have for sale a G&P Troy MRF-C in black with full trades. It’s in excellent condition, with only a few dings in very odd places. No problems whatsover. This is a beautiful rail, and incredibly solid. It includes all mounting hardware, and mounts to standard barrel nuts - a standard (NOT imperial) threaded KA nut can be included for $5 extra.
$70 shipped.
G&P Pararescue MBK
This MBK has been lightly used. While the pictures show the MBK stripped, it will be provided with all the normal receiver parts.
$75 shipped.
G&P M249 barrel extension
This is an almost new G&P M249 barrel extension - from para to full length. It’s full steel, CW threaded on both ends. Includes an O-ring on the far end to put pressure on the flash hider.
$25 shipped.
Thanks for looking!
Prices are shipped CONUS.
Trades:
Good quality Woodland MARPAT combat shirt, small or extra small
Good quality multicam pants, small long
High speed gears
TM pattern Mk23 mags - this means Y&P and TM, Y&P preferred.
~10" AR freefloat RIS
Dboys SCAR H
DMR
VSR-10 clone
Full inventory HERE.
AUG CQB
I’ve got a CQB AUG project I’m looking to get rid of. It was originally a CA AUG (non-sportline). Externally, it has a CQB Barrel (don’t remember brand, maybe Dytac?), a TM A2 front receiver, and a stock that’s been wrapped in digital camo tape. The stock job is very nice, as you can see. It also has had a woodland camo pattern painted on the TM receiver. It will come with the OEM CA flash hider, which appears to be of high quality.
In that category of internal/external, it has been modified with a bolt through the receiver to ensure good compression instead of the buttplate. In high performance AUGs, this is virtually required; it not only frees up battery space, but also holds compression, as the OEM reinforcement is likely to bend or break. And trust me, this one needed it.
Here’s the internals list:
G&G piston head
G&G ported cylinder
SHS 15 metal tooth piston (rack glued in place, AoE adjusted)
70 duro sorbo pad on the cylinder head
SHS 13:1 gearset (earlier generation, won’t fail like the latest ones)
AMP high torque motor
JG mosfet
12 awg non-oxygen very high quality speaker wire
Unknown brass barrel
I think that’s about it. With an 11.1 lipo, it should be firing ~35rps @ around 350fps. This is absolutely ready for a 20-40c 11.1 lipo.
However, there's a compression issue somewhere. It's currently getting 70-170fps, and I cannot figure out why.
It's also missing the mock bolt assembly, and will come with one JG hicap.
$215 shipped.
M1014 Trishot
I also have a chopped 1014 trishot with three shells and a removable stock - I removed the stock, then sourced a bolt and plate to keep the grip on. It also had the inner barrels stabilized with an electrical tape barrel spacer, as they were previously flopping all over the place.
I also have a six shell holder that attaches to velcro. Probably condor or the like. It’s approximately an OD green.
$60 shipped for the gun w/ accessories.
$15 shipped for the shell holder
JG G36c
I have a nearly complete G36c. It’s missing the left side selector. It also has a broken internal selector. This means that (unless you open up the gun and change it) it’s stuck on either full or semi auto. Safe still works, but not fire selection. It fires very smoothly; I think the previous owner shimmed it (rather well). I also had to replace the handguard and magwell pins with jerry rigged versions, although both substitutes work very well. Finally, one of the rear sight apertures is cracked in half. This is intentional, as it provides a nice UMP style CQB sight, and you can still flip to the other one if you want the full ring.
$65 shipped.
DSG Kit
This DSG kit includes a RiotSC sector gear, a precut KA M4 tappet plate, and the RiotSC short spring/spacer combo. No issues with any of the pieces, and they’ve all only seen light wear.
$75 shipped.
TM Aimpoint
This TM Aimpoint is in excellent condition and fully functional. Includes brand new batteries and the mount seen here.
$55 shipped.
TM G17
I have a stock TM G17 here with no issues. It's been well used, and shows a bit of wear. It has TM three dot night sights installed and a JBU 6.01 tightbore that's slightly too long, but significantly increases the range and accuracy. It's easy to hit a torso at 150ft with this thing.
Includes the original TM mag, which has a fill valve o ring.
$150 shipped.
Blue Force Gear M4 Chest Rig
This is in multicam, and very lightly used with no problems. BFG is a high quality real steel gear company, and this is an excellent lightweight rig.
$65 shipped.
Condor Multicam Battle Belt
I have a condor battle belt with OD blackhawk riggers belt, both in medium. No issues, very light use.
40 shipped.
Madbull Noveske 12.5" Rail
This rail has seen a lot of use, and has a lot of surface wear. No problems, and it includes all mounting hardware.
$75 shipped.
King Arms Troy MRF-C Rail
This rail is well used, and has a large amount of wear. No problems, however. It includes all mounting hardware, and mounts to standard barrel nuts - a standard barrel nut can be included for $5 extra.
$60 shipped.
Redline Firebase Package
I have a very lightly used Redline Firebase and bendy hose for sale. No problems, and never had any. Includes one set of qd connectors.
$125 shipped.
G&P Troy MRF-C (7”)
I also have for sale a G&P Troy MRF-C in black with full trades. It’s in excellent condition, with only a few dings in very odd places. No problems whatsover. This is a beautiful rail, and incredibly solid. It includes all mounting hardware, and mounts to standard barrel nuts - a standard (NOT imperial) threaded KA nut can be included for $5 extra.
$70 shipped.
G&P Pararescue MBK
This MBK has been lightly used. While the pictures show the MBK stripped, it will be provided with all the normal receiver parts.
$75 shipped.
G&P M249 barrel extension
This is an almost new G&P M249 barrel extension - from para to full length. It’s full steel, CW threaded on both ends. Includes an O-ring on the far end to put pressure on the flash hider.
$25 shipped.
Thanks for looking!
