|
|
Post by nbustarhymes on Jun 3, 2013 0:11:45 GMT -5
As you can see on the title I am looking for an M4 platform or similar that is 100% TM compatible.
Why? Because if you've looked through my WTS thread I'm getting rid of my KWA M4. Not because it sucks or its of poor quality but because some of its parts are proprietary and that means a lot of guess work as to what I can and cant buy to upgrade it.
So my question to you my fellow community is this...
What airsoft replica manufacturers make replicas that are 100% (or as close too) TM compatible?
While you are at it if you have any useful info on said brand or aftermarket upgrade parts that are 100% TM compatible please do tell.
|
|
|
|
Post by MotorMouth93 on Jun 3, 2013 9:41:43 GMT -5
I've heard good things about G&P.
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 11:11:45 GMT -5
Yeah me too.
|
|
thing1
Full Member
I'm going ape
Posts: 166
|
Post by thing1 on Jun 3, 2013 11:26:00 GMT -5
G&G maybe?
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 11:51:31 GMT -5
Any personal experience with G&P, MM?
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 12:47:23 GMT -5
I need solid info. Not maybe possibly. Preferably hands on experience.
|
|
thing1
Full Member
I'm going ape
Posts: 166
|
Post by thing1 on Jun 3, 2013 14:12:45 GMT -5
I've had 2 g&g one wasent upgraded, the other was and everything I got has worked so far
|
|
|
|
Post by dave OC-6 on Jun 3, 2013 14:54:40 GMT -5
how about kinda sorta?
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 16:04:54 GMT -5
Haha not not even kinda sorta.
How about Echo 1 or VFC?
|
|
|
|
Post by SnakeAssault on Jun 3, 2013 16:29:20 GMT -5
I know JGs are exact clones, at least in my experience.
|
|
|
|
Post by Midas on Jun 3, 2013 16:45:03 GMT -5
jg and echo 1 (since they are the same bodies anyways) should be 100% compatible.
|
|
|
|
Post by MotorMouth93 on Jun 3, 2013 22:15:58 GMT -5
I believe VFC uses slightly different pistol grips, but TM-spec grips can be modified to work. (narrower and closer to real steel)
And no I don't speak from personal experience on the G&P, but everything I've read points in that direction, and I've spent quite a bit of time on forums.
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 23:04:01 GMT -5
So the vfc grips are closer to RS or were you talking about TM grips?
|
|
|
|
Post by MotorMouth93 on Jun 3, 2013 23:06:02 GMT -5
VFC grips are closer to real steel.
|
|
|
|
Post by nbustarhymes on Jun 3, 2013 23:09:01 GMT -5
Ah okay. So with your experience you woukd say g&p is the way to go?
|
|
|
|
Post by nbustarhymes on Jun 9, 2013 6:29:11 GMT -5
So far the brand in the lead is G&P.
Followed by G&G and JP.
And VFC.
Anyone else have hands on exp with any of these?
|
|
|
|
Post by shadowhawk on Jun 10, 2013 6:46:54 GMT -5
jg is a clone of tm so it should be a perfect fit.
|
|
|
|
Post by MotorMouth93 on Jun 11, 2013 0:12:50 GMT -5
Apparently you don't know how clones work lol.
|
|
|
|
Post by nbustarhymes on Jun 11, 2013 11:10:49 GMT -5
A clone of a clone of a clone....leads to jacked tolerances.
So to clarify...which clone is the better of the many clones out there?
|
|
|
|
Post by punkabilly on Jul 2, 2013 0:38:51 GMT -5
Newer aps guns are 100% compatible and the look of the asr series is different i have a asr 112
g&g is also fully compatible i have cm16 and g4 cqbs
g&p has there own motor connections and the upper receivers need some mods to fit most aftermarket non g&p gearboxes and hopups have had a stubby killer and a m16a1
jg i have had horrible luck with three different guns two different problems trigger post sheared off in all three gearboxes and in sr25 stock spring cracked gearbox first time fielded
|
|
