|
Post by shadowhawk on Mar 18, 2013 11:52:19 GMT -5
dave, do you have a WE G18c outer barrel? and if so, how much would it be? i will be out this saturday.
|
|
|
Post by dave OC-6 on Mar 18, 2013 18:04:56 GMT -5
sorry no glock brls
|
|
|
Post by Spider on Mar 18, 2013 18:48:11 GMT -5
I'm pretty sure you can't just get the outer barrel by itself... You'll have to buy a whole new slide from Evike or whom ever carries them.
|
|
|
Post by shadowhawk on Mar 18, 2013 18:54:03 GMT -5
angry bear put his outer barrel from a timberwolf and it worked, so Dave you got any of those?
|
|
|
Post by shadowhawk on Mar 18, 2013 19:07:05 GMT -5
|
|
|
Post by Angry Bear on Mar 18, 2013 19:38:21 GMT -5
Cheapest outer barrel I've found so far is $30. You can get them by themselves but they are a bit pricy
|
|
|
Post by Spider on Mar 18, 2013 23:02:49 GMT -5
And then you can get a whole new upper slide for $50 So let's say you get just the outer barrel for $30 then down the road your slide cracks when you dive into a trench or bump into one of the buildings... you're gunna end up spending $80 total.
|
|
|
Post by Angry Bear on Mar 19, 2013 7:37:10 GMT -5
Here is the way i see it, the $30 outer barrel looks to be higher quality than the replacement of both items. Id rather spend a little more money to ensure the longevity of my gun. Yes it may be cheaper to buy the replacement set right no but when they crack and you have to buy a second set, you will have spent $100 rather than $80. You get what you pay for is what i am saying.
|
|
|
Post by MotorMouth93 on Mar 19, 2013 9:42:00 GMT -5
ARMY brand (clone of TM, which the WE is cloned from) makes a metal glock barrel that is $5. Considering it's a WE, spending much more than that probably isn't worth it.
|
|
|
Post by shadowhawk on Mar 19, 2013 10:40:33 GMT -5
i can only find that brand in g17. will that work? they should be the same right?
|
|
|
Post by Angry Bear on Mar 19, 2013 11:05:39 GMT -5
It should be. From what I have seen, the tm style g17's and g18's outer barrels are all the same.
|
|
|
Post by Angry Bear on Mar 19, 2013 11:25:23 GMT -5
True enough motor, I just look at is as a start for a building point.
|
|
|
Post by shadowhawk on Mar 19, 2013 15:49:05 GMT -5
the barrel from my we g19 fits. its just the brand. the other one was kwa. so anyone have any we glock outer barrels?
|
|
|
Post by MotorMouth93 on Mar 19, 2013 17:55:53 GMT -5
TM style Glock 17 and 18C use the same outer barrels. The ARMY one, being a clone of TM, will fit. It's $5 on Airsplat and can be found here. (Ignore the Facebook comments on the page, those guys don't know what they are talking about.)
|
|
|
Post by shadowhawk on Mar 19, 2013 19:22:07 GMT -5
thanks. if i cant find one on here i will order it, im just trying to avoid paying shipping.
|
|