|
|
Post by 88B88888B88B888 on Mar 12, 2012 14:02:17 GMT -5
Classes are over for now so I have some time to do some work
All prices are based on if you have the parts to fix, any parts needed must be supplied by yourself or price will be added on for parts.
Gearbox maintenance/repairs - Included polished inner gearbox, replace of parts (price not added for replaced parts), Upgrades, shimming. 20+ w/ mechbox already out of gun add 5$ for mechbox in gun.
spring change only (you provide spring) 10
Shimming only (you provide shims) 10
Rewiring (you provide materials/triggerhousing) - 10
Any other work will be a case by case basis.
I eventually will get into custom battery packs as well more to be followed
|
|
|
|
Post by Spider on Mar 12, 2012 14:52:13 GMT -5
Can you work on WELL MP7 gearboxes?
|
|
|
|
Post by 88B88888B88B888 on Mar 12, 2012 15:39:26 GMT -5
It's a v5 so I'll take a look at it, parts might be hard to come by though. What is it doing exactly or not doing.
If something is broken, then it will be difficult to find parts for it. V5 gears are smaller than v2/3, same goes for the rest of the internals as well. The motor is unique, the gears, pistol, cylinder and spring.
|
|
|
|
Post by Spider on Mar 12, 2012 15:46:08 GMT -5
Nah i just wanted some basic maintenance done on it ;D i kinda doubt the previous owner did any since i've been finding sand and dirt in between rails, spaces on the grip, etc... so just get cleaned and lubed along with a shim job and a tightbore installed.
|
|
|
|
Post by 88B88888B88B888 on Mar 12, 2012 18:07:17 GMT -5
Alright that's fine prices are as listed.
|
|
|
|
Post by Spider on Mar 12, 2012 18:22:42 GMT -5
How much for installation of the tightbore barrel?
|
|
|
|
Post by 88B88888B88B888 on Mar 12, 2012 18:46:41 GMT -5
Is the mech box out of the gun already? if not then 30 for everything, if so just 25 for cleaning and maint. and install barrel
|
|
|
|
Post by Spider on Mar 12, 2012 19:00:46 GMT -5
No mechbox is still inside the gun, can't find my allen wrenches to get it open  |
|
|
|
Post by 88B88888B88B888 on Mar 12, 2012 19:31:13 GMT -5
Np, I can get it opened
|
|
|
|
Post by Spider on Mar 12, 2012 20:16:41 GMT -5
So if we meet up Wednesday can you just do the gearbox maintenance/shimming at the field? I don't have the tight bore barrel yet so that'd be for later. Would it be just $25 then?
|
|
|
|
Post by 88B88888B88B888 on Mar 12, 2012 20:27:07 GMT -5
I don't like working out at the field for many reasons. A screw falls on the ground it's gone for good.
|
|
Snail
New Member
Posts: 41
|
Post by Snail on Mar 25, 2012 18:08:48 GMT -5
can you install a low power bolt in my KWA MP7?
|
|
Snail
New Member
Posts: 41
|
Post by Snail on Mar 25, 2012 18:09:05 GMT -5
And if so for how much?
|
|
