|
|
Post by sasquatch on Sept 9, 2012 2:06:23 GMT -5
Guys i would like to trade or buy a m4 higher grade no dpms i am looking for full metal recievers um not over 200 if thats possible if anyone has one willing to trade or sell i have a m14 id trade msrp 275 only thing wrong with it i had to rig a stock so tbut thats all so if u have one id greatly apriciate it
|
|
|
|
Post by sasquatch on Sept 9, 2012 2:07:38 GMT -5
I would even throw in some money with my m14 like up to 100
|
|
|
|
Post by goober6644 on Sept 9, 2012 10:41:49 GMT -5
Would you willing to negotiate for a polymer receiver?
|
|
|
|
Post by Rabit TFS on Sept 9, 2012 11:46:14 GMT -5
Metal receivers suck dude. I replace all my metal receivers with ABS because the metal cracks and snaps to easily.
|
|
|
|
Post by goober6644 on Sept 9, 2012 12:20:53 GMT -5
I have a nice custom m4 I would not mind parting with if your interested.
|
|
|
|
Post by sasquatch on Sept 9, 2012 12:40:02 GMT -5
@goober what does it have in it i might trade and what kind of inner barrel
|
|
|
|
Post by goober6644 on Sept 9, 2012 13:33:42 GMT -5
Reinforced gearbox 8mm ball bearing bushings
High torque gears
M110 spring
Steel spring guide with ball bearing
Reinforced tappet plate
Reinforced piston and piston head
high torque motor
Classic army 6.04mm 363mm inner barrel
Aim hop up chamber
G&P hopup bucking
AIM free float rail with covers (rifle length)
Vert grip
Steel flashhider
Magpul MOE stock
Classic army Peq box
G&P red dot scope 1x zoom
The body is a licensed Colt body
I can put a 6.04mm 509 with a mock suppressor
|
|
|
|
Post by MotorMouth93 on Sept 9, 2012 14:36:56 GMT -5
Metal receivers suck dude. I replace all my metal receivers with ABS because the metal cracks and snaps to easily. Many M4 AEG's no longer use the two tab design which was so prone to failure. |
|
|
|
Post by sasquatch on Sept 9, 2012 15:09:06 GMT -5
@goober yeah so u want the m14 i will gladly trade u for it
|
|
|
|
Post by sasquatch on Sept 9, 2012 15:10:04 GMT -5
What fps does it have
|
|
|
|
Post by sasquatch on Sept 9, 2012 15:14:10 GMT -5
Are u reffering to give me a suppressor ;D
|
|
|
|
Post by goober6644 on Sept 9, 2012 15:28:56 GMT -5
I can put the 509mm inner barrel and will include the mock suppressor. I'm mostly looking for cash right now if that's not a problem. Also the fps is about 350-370. I can put an m120 in it.
|
|
|
|
Post by sasquatch on Sept 9, 2012 16:08:36 GMT -5
Ok um that would work do u want the m14 u can sell the internals for like 175 cause thats what their worth
|
|
|
|
Post by sasquatch on Sept 9, 2012 16:11:14 GMT -5
Just the gearbox is like 100 the motor on it is worth 75 at least i looked them up
|
|
|
|
Post by goober6644 on Sept 9, 2012 16:26:57 GMT -5
Id prefer cash for the m4. Would be too difficult to sell the m14 internals. Hope you understand
|
|
|
|
Post by dave OC-6 on Sept 9, 2012 17:45:08 GMT -5
PLEASE DONT USE THE WORD SUPRESSOR ON THIS FORUM. WE DONT SELL SUPRESSORS HERE AND THEY ARE NOT ALLOWED ON THE FIELD. barrel extendors, barral covers, etc are. more and more recivers are going to the 1 pin system. both 1 and 2 pin systems have good points and bad points. i for the most part like metal recievers but treat them with kid gloves sometimes. but each there own  |
|
|
|
Post by sasquatch on Sept 9, 2012 19:12:29 GMT -5
alrighty how much would you want for it
|
|
|
|
Post by sasquatch on Sept 9, 2012 20:15:19 GMT -5
***CHANGE*** i will take any m4 just no plastic gearboxes and no broken guns i will upgrade as needed if i dont get goobers gun
|
|
|
|
Post by goober6644 on Sept 10, 2012 6:20:57 GMT -5
I would be happy with 200
|
|
|
|
Post by sasquatch on Sept 10, 2012 7:05:04 GMT -5
can you post a pic
|
|
|
|
Post by goober6644 on Sept 10, 2012 8:00:13 GMT -5
As soon as I can I will.
|
|
