Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 12, 2012 18:41:43 GMT -5
Dave,
What kind of support weapons do you carry? Im very interested in adding a SAW or another type of mass fire power to my very conservative personnel arsenal.
|
|
|
Post by dave OC-6 on Jan 12, 2012 19:03:38 GMT -5
for a supprt gun i would go with a SAW with a short brl but full but stock., thats just me
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 12, 2012 19:07:13 GMT -5
Apologies, I meant what support weapons do you have at the store? I do favor a short barrel SAW. I liked the PARA SAW we had in ducka ducka land, but I dont mind a full butt stock.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2012 16:36:11 GMT -5
Dave, Do you have a MK43 or a M249 at the store?
|
|
|
Post by Redkangavoosa on Jan 14, 2012 18:01:15 GMT -5
I can answer you there and say that the Mk43 Dave has is an AREs.
Although, in my personal opinion, if you want to go the M60 route, save up, and find an Inokatsu. Inokatsu M60s use Version 3 AK gearboxes, so if anything breaks, you're not screwed.
STAY AWAY from the A&K M60s.
The M249s would probably be a safer route to go, but the only issue with those are the box mags.
In my experience, the box mags for M249s that suck the least are the Classic Army ones, otherwise you can just run a ton of M16 series hicaps/midcaps in the SAW, and you should be fine as well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2012 18:52:31 GMT -5
Thank you very much Red! I have been doing a lot of research and I have to admit the A&K's seemed a little suspect. I am leaning toward an Echo 1 M249. Can you give me any intel on that? All information is greatly appreciated.
|
|
|
Post by dave OC-6 on Jan 14, 2012 21:24:29 GMT -5
a and k m-249s are good, M-60s (first run) are not so good inside, but as long as you dont mess with one they will be great. only time i see them go down is when people try to TWEEK them.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 14, 2012 21:29:50 GMT -5
Do you have any on stock Dave?
|
|
|
Post by dave OC-6 on Jan 14, 2012 21:40:17 GMT -5
yes
|
|