Fox
Full Member
Jedi Master
Posts: 185
|
Post by Fox on Nov 30, 2011 16:49:51 GMT -5
|
|
|
|
Post by Foggy (CR4) on Nov 30, 2011 17:50:10 GMT -5
Wullf,
I don't think that is actually a QD point. From what i've been able to gather, that would be where you would thread / tie / knot the 550 cord that you would then attach the sling to on the Tavor.
|
|
wraven
Full Member
Clan Reckoning (CR)
Posts: 198
|
Post by wraven on Nov 30, 2011 18:00:28 GMT -5
Yup - Real Steel uses 5-50 cord if you can believe it...
Route the 5-50 cord through the front sling pin and tie it off. For the rear of the stock, you route both ends of 5-50 cord through the rear stock sling hole, then tie it off to the opposite side. This allows for a low profile tight sling attachment point to the weapon.
|
|
Fox
Full Member
Jedi Master
Posts: 185
|
Post by Fox on Nov 30, 2011 18:43:02 GMT -5
ok cool, where can I find the 5-50 cord, and is there a particular way to tie it or is it one of those when you see it it explains itself?
|
|
wraven
Full Member
Clan Reckoning (CR)
Posts: 198
|
Post by wraven on Nov 30, 2011 19:52:03 GMT -5
5-50 cord can be found at any Military surplus shop - I wouldn't be surprised if Dave has spools of it lying around too.
As for the knot - it depends on how much you learned in the boy scouts ;D
|
|
Fox
Full Member
Jedi Master
Posts: 185
|
Post by Fox on Nov 30, 2011 21:41:41 GMT -5
well I can do my best to recall my boy scout years, but that was sometime ago. There is always the good old interweb to help job the memory too. What knot am I looking to tie?
|
|
|
|
Post by dave OC-6 on Nov 30, 2011 22:35:31 GMT -5
yes i have some spools, one hanging up by the pistols
|
|
Fox
Full Member
Jedi Master
Posts: 185
|
Post by Fox on Nov 30, 2011 22:39:35 GMT -5
nice, I'll check them out on the 10th then and get some hands on help with the knot if need be. Thanks for the help.
|
|
