|
Post by Short Fuze on Nov 9, 2011 10:25:49 GMT -5
Looking to buy a tight bore barrel between 255mm to 270mm in length. This is going into a MC51/G3/T3. Approx barrel length is 257mm and 6.10mm inner barrel diameter. Grouping on this gun is terrible.
|
|
|
Post by Short Fuze on Nov 9, 2011 11:00:36 GMT -5
Or anything longer than that. I just read you can cut them down using a hacksaw/pipecutter and a crowning tool. Which I have both. Found a barrel on evike.com for about 30 bucks but prefer to buy locally.
Dave?
|
|
|
Post by dave OC-6 on Nov 9, 2011 13:50:37 GMT -5
yes have them
|
|
|
Post by Short Fuze on Nov 9, 2011 14:36:38 GMT -5
Can u ship them and how much? 78747.
|
|
|
Post by 88B88888B88B888 on Nov 11, 2011 1:31:14 GMT -5
Careful about cutting them, they are more prone to cut or bend while cutting. just get the correct size and you'll be just fine
|
|
|
Post by Short Fuze on Nov 11, 2011 9:06:02 GMT -5
Thanks Mr Poo.
|
|
|
Post by 88B88888B88B888 on Nov 11, 2011 11:00:35 GMT -5
np
|
|